Search results

Is cold tire inflation psi the same in a 190 as it is for a regular 180 size tire?

I just took a fork apart to replace a small leak I couldn’t remedy with sealmate. Surprisingly to me after 47k original miles on the forks, and the first time a seal leaks, the tubes came apart fairly easy with just 5 whacks.  The middle bushing is in better than expected shape it shows very...

I need the mirror assembly to pull the small pivot bearings. I lost the tiny bearings and cannot mount the mirror until I find the bearings

I did the clutch soak on my Gen II with 42,000 miles and followed procedures in mctrophy post.    Took each plate out and in sequence but did not remove last plate retained by a wire. I used castrol motorcycle 10w40 oil for 2 hours then reassembled carefully ensuring pressure plate was centered...

Its the small collar spacer on the right side of rear wheel. If you check parts shark it us part number 90387-206W8-00

Need Gen II windshield stay with all mounting tabs and two anchor points, prefer a 2010 for color matching

I went for a ride yesterday in my 2010 and as usual I reset my trip meter. Sometime into the ride I look at my MPGs and see 99.9 MPGs...a second later it goes to 46.7 and a second later it goes to 50 something. This happened at 66 MPG (GPA indicated) constant speed. This continued all the way...

So I have always used the Bosch 3323 D oil filter in my FJR and now it is not available any longer at Walmart--checked on line and all over town (posted on their website but only available at stores for pickup--problem is none of the stores have it). I went to the usual auto parts stores and...

Looking for a Gen III complete shock assembly with very low miles.

Anyone knows the color code for the wheels on the Gen II? My wheels have some scratches I want to touch up. I assume you only sand and respray, no primer or clear coat?

Anyone knows of a reliable shop in San Antonio to have my FJR serviced? I usually do most of the maintenance myself but I want to know if there is a decent shop that does quality work in case I need to have someone work on the bike.

Looking for the Gen III rear shock with very low miles on it.

Did the rear wheel spacer change in the gen II ABS? I was looking at a parts fiche and for my 2010 it did not show the spacer on the diagram but iot showed it for a Gen I..

I noticed some wandering from the front end today while riding my 2010 FJR with 11400 miles. I had never felt this before but luckily I was able to turn around and ride 20 miles to get her home safely. It felt weird at speeds between 40-60 mph as if something was loose. The Dunlop sportmax Q2...

I have read many posts that allude to Rotella oil as a good oil to use. Today at the dealership the parts guy said Rotella was not a good oil to use on our motorcycles and I should steer away from using it. Has anyone heard that before? He said it was a diesel engine oil not to be used in...