If someone felt the urge to soak the clutch plates why not just add enough extra oil to get the level up enough to submerge the clutch. Not to say you would run it that way, just to "soak" the clutch if it seems necessary. Drain the extra out before starting. No need to dissassemble this way.
Ahem, seems you have missed a point or two ole friend. The friction discs are sticking because of that black goo....the grease they were coated with at the factory (instead of an oil coating). The clutch pack has to come apart for a thorough cleaning first, then bathe the fibre discs in oil before reassembly. What you are preposing dosen`t make sense. But, then again, you work for G.M. don`t you? :blink: