Greenham
Well-known member
Does anyone happen to know the In/Out wiring combination for the starter button. Not the kill switch just the momentary contact starter button.
Starter Button wiring question
- Thread starter Greenham
- Start date
Help Support Yamaha FJR Motorcycle Forum:
n2osx
Well-known member
The power goes in on a White/Blue wire and then grounds with a Black wire right at the switch.
Last edited by a moderator:
mcatrophy
Privileged to ride a 2018 FJR1300AS
Don't understand the question. There are two wires, black (ground) and blue/white (or white/blue depending on which side of the connector). Join them to start, release when started.
Greenham
Well-known member
So the switch just provides the momentary "ground" to the starter relay.
Thanks guys. That is helpful
Thanks guys. That is helpful
