Diag Mode 2016 model

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flars

Well-known member
Joined
May 5, 2012
Messages
75
Reaction score
20
Location
tampa
Okay, I give up. I just did a valve check (no changes needed), put the beast back together, and now the Engine Trouble light is on.

I tried holding the TCS and RESET buttons and turning the switch to ON, holding the buttons for what seems an inordinate amount of time (30 seconds), and nothing changes on any of the screens...So how do I get into DIAG MODE on this 2016 model?

 
Last edited by a moderator:
Did it mention in your owner manual? If not, it's not there. My 2014 owner manual specifically said how to run DIAG.

 
A forum member figured out how to access the OBD and posted extensive info about it on the forum. Can't remember details, but searching should get you the info you need. I ride a 07, so my brain didn't put much importance in that info. ;)

 
Are you sure you don't have something unplugged before you start buying diagnostic tools? If the bike runs, it has to be something simple,

 

Latest posts

Top