Calgary Tech Day
#1
Posted 15 September 2011 - 09:52 AM
Depending on the work that folks plan, it could be at either my garage or his... mine if tire changes are needed, so I don't have to move the tire machine.
PM or post up if you're interested. I'll send location/date/time details to the usual suspects and anyone else who is interested.
Cheers,
Griff
Not all who wander are lost... IBA#53874, CBA# 26 (if Carver ever gets around to updating the CBA list!)
NAFO '08, '12; CFR '09, '10, '11. '12; WCR '10, 11
#2
Posted 16 September 2011 - 08:52 AM
SS1K - every WFO since 2004 (except 2010), CFR 2007, NAFO-1, CFR 2009, CFR 2010, WCR 2010, NAFO-3,
'Jesus loves you' - a nice gesture in church, but a horrifying thing to hear in a Mexican prison...

#3
Posted 16 September 2011 - 09:30 AM
Hi Jeff(s): I think I will ramble on over for the day if it's going to be that weekend. I need to install my Brodie harness (DWP did the spider check earlier this week and put on the Yamaha harness, said everything looks fine). I also need to waterproof my new cruise control switch and get it installed to replace the one that you guys haywired for me last Summer (still working great!) Maybe install some trailer harness wiring (hint, hint?)
Trailer wiring is a STRONG possibility. I got a heads up from Podium that the back-ordered bits I've been waiting for are finally available, so hopefully that will be all together for when you get here and you can tow the beast home.
I'll pick up the isolator relay thingy today.
Griff
Not all who wander are lost... IBA#53874, CBA# 26 (if Carver ever gets around to updating the CBA list!)
NAFO '08, '12; CFR '09, '10, '11. '12; WCR '10, 11
#4
Posted 19 September 2011 - 09:25 PM
Is there anyone interested in buying a full set of reflective decals (side and the bags from realtime), yamaha magnetic oil plug and/or chrome tip over guards and maybe HID's (if they don't work with my modulator, which i don't think they will) all to fit a Gen 2? If someone is, I'll bring them along.
Worney
Almost in the Rockies (but still too damn flat).
#5
Posted 20 September 2011 - 06:47 PM
SS1K - every WFO since 2004 (except 2010), CFR 2007, NAFO-1, CFR 2009, CFR 2010, WCR 2010, NAFO-3,
'Jesus loves you' - a nice gesture in church, but a horrifying thing to hear in a Mexican prison...

#6
Posted 20 September 2011 - 08:09 PM
I'd be interested in the bag decals Worney what are you asking?
They are these http://www.realtimei...-fairing-decals for $23.99 and http://www.realtimei...side-bag-decals for $13.99 and http://www.realtimei...rear-bag-decals for $17.50 all in black with just the FJR logo on top in silver (no yamaha on the bottom). There was shipping on top of that as well. How about $30 for all of them? You can see them mounted on mine. They are almost invisible on my black beauty until the light hits them then they are impossible to miss. Let me know what you think.
Worney
Almost in the Rockies (but still too damn flat).
#7
Posted 21 September 2011 - 08:58 AM
Long term weather forecast is looking good! Sunny and mid-teen temps. Perfect!
Dave, it'll be awesome to see you. Wanted to get out your way this summer but never got it worked into the schedule.
Worney, it'll be a nice wknd for a ride up. Bring your spare farkles with you, you never know what peeps might want if they see and touch it!

#8
Posted 23 September 2011 - 02:11 PM
I'll take the bag decals for sure Worney - see you there.
I'd be interested in the bag decals Worney what are you asking?
They are these http://www.realtimei...-fairing-decals for $23.99 and http://www.realtimei...side-bag-decals for $13.99 and http://www.realtimei...rear-bag-decals for $17.50 all in black with just the FJR logo on top in silver (no yamaha on the bottom). There was shipping on top of that as well. How about $30 for all of them? You can see them mounted on mine. They are almost invisible on my black beauty until the light hits them then they are impossible to miss. Let me know what you think.
Worney
SS1K - every WFO since 2004 (except 2010), CFR 2007, NAFO-1, CFR 2009, CFR 2010, WCR 2010, NAFO-3,
'Jesus loves you' - a nice gesture in church, but a horrifying thing to hear in a Mexican prison...

#9
Posted 23 September 2011 - 02:15 PM
FJRGuy and I are planning another tech day for Calgary, likely on 1 or 2 October.
Depending on the work that folks plan, it could be at either my garage or his... mine if tire changes are needed, so I don't have to move the tire machine.
PM or post up if you're interested. I'll send location/date/time details to the usual suspects and anyone else who is interested.
Cheers,
Griff
Have we picked which day and set a location yet? Either would work fine for me.
SS1K - every WFO since 2004 (except 2010), CFR 2007, NAFO-1, CFR 2009, CFR 2010, WCR 2010, NAFO-3,
'Jesus loves you' - a nice gesture in church, but a horrifying thing to hear in a Mexican prison...

#10
Posted 26 September 2011 - 07:43 AM
Have we picked which day and set a location yet? Either would work fine for me.
FInal confirmation today. I'm voting for Saturday, at FJRGuy's... but I'll be wrenching all weekend so either day works for me, and if folks want to either start early or finish late, that won't be a problem.
I WILL have the trailer together mid-week, I'll send you a picture
Griff
Not all who wander are lost... IBA#53874, CBA# 26 (if Carver ever gets around to updating the CBA list!)
NAFO '08, '12; CFR '09, '10, '11. '12; WCR '10, 11
#11
Posted 27 September 2011 - 11:14 AM
Sunday (2-Oct-2011) and my place! Anytime after sunrise until whenever we are done.
Food and beverages will be served.
I have Oil, filters, crush washers available if you need any.
Let us know what you plan to do and we'll try and make sure we have all the tools and supplies we need.
I have space available for anyone from outta town wanting to stay Saturday night and get an early start on wrenching.
Canucklehead will be wrenching at his place on Saturday so if you need a tire change pop him an email. I'm sure he will accommodate! ;-)

#12
Posted 27 September 2011 - 11:37 AM
Canucklehead will be wrenching at his place on Saturday so if you need a tire change pop him an email. I'm sure he will accommodate! ;-)
Yep... need a tire change (or whatever) give me a shout. If you can't make it Sunday to FJRGuy's, but can drop by Saturday drop me a line and I'll give you directions to Casa Griff
Griff
Not all who wander are lost... IBA#53874, CBA# 26 (if Carver ever gets around to updating the CBA list!)
NAFO '08, '12; CFR '09, '10, '11. '12; WCR '10, 11
#13
Posted 02 October 2011 - 08:52 PM
Was a great social time and learning experience. :-)

#14
Posted 03 October 2011 - 06:44 AM
My Brodie harness becomes this week's project, as well as tracing down an electrical gremlin somewhere in the CCS wiring. I know how to work around it, but I'd really like to find the root cause and fix it properly this time.
Nice to meet Worney briefly at Canucklehead's place on Saturday and to see Terry again, yesterday. Also great to meet FJRGuy's SO, Rosanne, and to spend some time with Lucie again.
Quality over quantity?!
SS1K - every WFO since 2004 (except 2010), CFR 2007, NAFO-1, CFR 2009, CFR 2010, WCR 2010, NAFO-3,
'Jesus loves you' - a nice gesture in church, but a horrifying thing to hear in a Mexican prison...

#15
Posted 03 October 2011 - 10:21 AM
FJRGuy - Sorry I didn't get a chance to meet you perhaps another time.
FastJoyRide - Sorry I had to take off so quickly, enjoy the decals.
Nice to meet Dave (Jeff's son)as well.
See you all again soon.
- worney
Almost in the Rockies (but still too damn flat).
#16
Posted 06 October 2011 - 02:21 PM
Thanks again to the Jeff and Jeff team for a great weekend - I thoroughly enjoyed it. Riding in 200+ miles of rain each way - not so much, but we got-er-dun! (God bless Gerbing electics and my wonderful Cycleport gear - I was warm and dry) My Brodie harness becomes this week's project, as well as tracing down an electrical gremlin somewhere in the CCS wiring. I know how to work around it, but I'd really like to find the root cause and fix it properly this time.Nice to meet Worney briefly at Canucklehead's place on Saturday and to see Terry again, yesterday. Also great to meet FJRGuy's SO, Rosanne, and to spend some time with Lucie again.Quality over quantity?!
Another thanks for the "help" from Jeff (canucklehead-biker)
I put the help in quotes because other then a few bolts and screws I mostly watched as he told me what he was doing.
But, I now think that I actually could do the job on my own if I had to, which was certainly not the case on Sat. am.FJRGuy - Sorry I didn't get a chance to meet you perhaps another time.FastJoyRide - Sorry I had to take off so quickly, enjoy the decals.Nice to meet Dave (Jeff's son)as well.See you all again soon.- worney
Glad we could help... was nice to have you fellas over. Cheers!
Griff
Not all who wander are lost... IBA#53874, CBA# 26 (if Carver ever gets around to updating the CBA list!)
NAFO '08, '12; CFR '09, '10, '11. '12; WCR '10, 11










