Jump to content


Front Flasher Light Assembly Replacement

  • Please log in to reply
1 reply to this topic

#1 Nate


    Training Pilot

  • Members+
  • PipPip
  • 72 posts
  • Gender:Male
  • Location:Denver, PA
  • 2008 ABS (Gen II) N. America

Posted 18 March 2012 - 04:43 PM

After a tip over incident last year I would like to replace the right side mirror and front flasher assembly. I found some info on the mirror but would like to know what is involved replacing the flasher assembly. Thanks. 2008 FJR
100% of the shots you don't take don't go in.
Wayne Gretzky


#2 escapefjrtist


    Searching for Dry Roads

  • Members++
  • PipPipPipPipPip
  • 9,111 posts
  • Gender:Male
  • Location:Snohomish, WA
  • 2015A (Gen III) World

Posted 18 March 2012 - 05:48 PM

Remove the RT side fairing piece, the turn signal lens is held on by two screws. The forward screw is removed when the front inner panel (item 44) is removed and the rear one (item 52) is accessible with the fairing off.

There are about nine-ish screws removed to get the side off. First time is a PITA but once you've done it, it comes off in a jiffy. Here are the item numbers and a little detail from Cycle Parts Warehouse.

Good luck!


IBA 34365

'15 FJR

'12 Super Tenere