After a tip over incident last year I would like to replace the right side mirror and front flasher assembly. I found some info on the mirror but would like to know what is involved replacing the flasher assembly. Thanks. 2008 FJR
Front Flasher Light Assembly Replacement
Started by
Nate
, Mar 18 2012 04:43 PM
1 reply to this topic
#1
Nate
-
- Members+
-
- 69 posts
Training Pilot
- Gender:Male
- Location:Denver, PA
-
Bike: 2008 ABS (Gen II) N. America
Posted 18 March 2012 - 04:43 PM
100% of the shots you don't take don't go in.
Wayne Gretzky
http://www.youtube.com/user/fjrnate
Wayne Gretzky
http://www.youtube.com/user/fjrnate
#2
escapefjrtist
-
- Members++
-
- 5,442 posts
Searching for Dry Roads
- Gender:Male
- Location:Snohomish, WA
-
Bike: 2009 ABS (Gen II) N. America
Posted 18 March 2012 - 05:48 PM
Remove the RT side fairing piece, the turn signal lens is held on by two screws. The forward screw is removed when the front inner panel (item 44) is removed and the rear one (item 52) is accessible with the fairing off.
There are about nine-ish screws removed to get the side off. First time is a PITA but once you've done it, it comes off in a jiffy. Here are the item numbers and a little detail from Cycle Parts Warehouse.
Good luck!
--G
There are about nine-ish screws removed to get the side off. First time is a PITA but once you've done it, it comes off in a jiffy. Here are the item numbers and a little detail from Cycle Parts Warehouse.
Good luck!
--G
