Need help!
#21
Posted 31 March 2012 - 12:06 PM
Josh
#22
Posted 31 March 2012 - 12:15 PM
FJR#1 - The 'Dirty Ol Whore' - 2004 non-abs - RIP @ 226,400 - Gone, but not forgotton.
FJR#2 - The 'Hula Girl' - 2004 ABS - 129k
FJR#3 - The 'Virgin' - 2004 ABS - 4344 miles, a garage queen - Brundog would be proud!
FJR#5 - The Bastard POS Gen II - 2009A - 6,000+
#23
Posted 31 March 2012 - 04:54 PM
Thanks everyone for all the suggestions. Got into a shop today and the front tire was out if balance. don't know why it started having problems after 1000 miles, but they balanced it and it rides great again. Thanks again.
Josh
One more reason to use Dyna Beads for a "glass smooth ride"
#24
Posted 31 March 2012 - 05:06 PM
... Got into a shop today and the front tire was out if balance. don't know why it started having problems after 1000 miles, but they balanced it and it rides great again...
Thanks for sharing your results.... I have noticed over the last couple of years that the Sticky Back on the Lead Weights (poorer quality) have been flying off the wheels.
Don't be surprised if this does not happen again... and please keep your speed down under a 100 mph.
#25
Posted 31 March 2012 - 07:52 PM
#26
Posted 01 April 2012 - 05:48 AM
Yep! This place is Awesome!It is amazing how a simple troubleshooting thread can take off like this with limited information. You guys are a wealth of knowledge and I have now added 4 or 5 things to check myself if I experience similar symptoms while I am riding. Another reason why I enjoy spending time reading this forum...THANKS ALL!
#27
Posted 01 April 2012 - 04:46 PM
The shop I took it to and I were both wrong. My front tire may have been out of balance, but it became very apparent on my way back to Charleston today that it wasn't what was causing my issue. I am now about 90% sure that Bustanut joker and RaYzerman19 were right. I believe that it is a problem with my rear shock. It road okay for a little while, but then started again. It didn't take me long to realize that I felt every bump and my rear shock was no longer doing its job. I stopped at a rest stop and adjusted my rear suspension and even with everything set to the stiffest settings there is no difference. I can stand behind the bike and bounse it up and down like a 400lb guy just sit on the passenger seat. Now I have to act quick and find a new rear shock cause I have to ride back to Michigan in 18 days. I haven't even priced them yet, but I'm hoping I can get one cheap cause this couldn't have happened at a worse time money wise. If anyone has a rear shock sitting around for an 04 that they want to sell let me know asap. I still can't believe it is the shock. The bike only has 10,000 miles on it. As a matter of fact I just rolled over 10000 today!
#28
Posted 01 April 2012 - 05:01 PM
#29
Posted 01 April 2012 - 10:02 PM
Will this Gen 2 work?Update...
The shop I took it to and I were both wrong. My front tire may have been out of balance, but it became very apparent on my way back to Charleston today that it wasn't what was causing my issue. I am now about 90% sure that Bustanut joker and RaYzerman19 were right. I believe that it is a problem with my rear shock. It road okay for a little while, but then started again. It didn't take me long to realize that I felt every bump and my rear shock was no longer doing its job. I stopped at a rest stop and adjusted my rear suspension and even with everything set to the stiffest settings there is no difference. I can stand behind the bike and bounse it up and down like a 400lb guy just sit on the passenger seat. Now I have to act quick and find a new rear shock cause I have to ride back to Michigan in 18 days. I haven't even priced them yet, but I'm hoping I can get one cheap cause this couldn't have happened at a worse time money wise. If anyone has a rear shock sitting around for an 04 that they want to sell let me know asap. I still can't believe it is the shock. The bike only has 10,000 miles on it. As a matter of fact I just rolled over 10000 today!
http://www.fjrforum....howtopic=144568
#30
Posted 01 April 2012 - 10:08 PM
89 GSXR 750, 85 Ninja 600, 79 750 Special, 72 CB175
#31
Posted 01 April 2012 - 10:09 PM
Will this Gen 2 work?
http://www.fjrforum....howtopic=144568
Gen II has different spring rates than Gen I, but I bet it will work. The price is right.
Or, I bet someone will show up here offering their not needed Gen I (03-05) shock.........
FJR#1 - The 'Dirty Ol Whore' - 2004 non-abs - RIP @ 226,400 - Gone, but not forgotton.
FJR#2 - The 'Hula Girl' - 2004 ABS - 129k
FJR#3 - The 'Virgin' - 2004 ABS - 4344 miles, a garage queen - Brundog would be proud!
FJR#5 - The Bastard POS Gen II - 2009A - 6,000+
#32
Posted 02 April 2012 - 06:49 AM
#33
Posted 02 April 2012 - 07:03 AM
Did you check the Rear Tire Pressure?
When the Tire Pressure is low in the Rear, it affects the Front Feel/Handling bigtime... that's what happened to me to my surprise...
Glad you are OK and found your problem... so if you think your Front feels funny, Check the Workings on the Rear... but not Visa Versa... strange Phenomenon.
#34
Posted 02 April 2012 - 08:22 AM

#35
Posted 02 April 2012 - 08:59 AM
2012 Yamaha FJR1300 - Cobalt Blue, the fastest color to roll off Yamaha's FJR assembly line.
#36
Posted 03 April 2012 - 04:59 PM
you can have my old shock if you want it, But i wont be home until the weekend. Send me a message is your interested.
Thank you for the offer, but I had one mailed out to me today thanks to no1passesme. Hopefully it will be here by this weekend and I can get it installed over the weekend.
#37
Posted 03 April 2012 - 06:34 PM
Cool Beans! You'll be back in the Saddle Again Soon.
you can have my old shock if you want it, But i wont be home until the weekend. Send me a message is your interested.
Thank you for the offer, but I had one mailed out to me today thanks to no1passesme. Hopefully it will be here by this weekend and I can get it installed over the weekend.
#38
Posted 03 April 2012 - 08:09 PM
One more reason to use Dyna Beads for a "glass smooth ride"
The whole chicken strips thing is BS. - HaulinAshe 7/29/2010
Man, there's a lot of info here if I just shut my pie hole and read. -- madmatt 8/5/2010
#39
Posted 04 April 2012 - 04:28 AM
Really?! Tell me more.
One more reason to use Dyna Beads for a "glass smooth ride"
#40
Posted 04 April 2012 - 05:05 AM



Confucius say: "No matter where you go ..... there you are"










