Recent content by BobQ

As far as the stumble, make sure your auto tune has no F/A ratios in the 2% column, and the 5% column up to about 5000 rpm. Also check your map, I am thinking †he auto tune has set some of the above areas into the negative nums, if they are, set them back to the stock table, some where from 5...

What did you put in the off idle? I have a five with auto tune and added 2 from just above idle to about 3000 rpm, I can check and get exact numbers if interested, but wondering what your looks like? Thanks Bob

So my PC III died and I sent it back to see if it could be repaired, and it could not, so they offered me a deal on a new V, very nice of PC I thought! so I ordered a auto tune as well. So the question, are any of you putting in ajustment in the 0 or 5% throttle collums? With my base maps I...

So I finaly got word the power comander iii is dead and not repairable, so a V with auto tune is on its way!

Still waiting, power commander is running late due to busy season. I'm going with auto tune one way or another, I will report back when I hear.

In the 0% throttle cell add 10% - 20%. Anything less than 1500 rpm or so leave alone, it will run like a carbureted bike! They use to call it dry stacking, I think anyway. I had a thread about this back in 09 but can't find it. Report back and tell us how it rides. Start at 10% and work up!

Sent an email! got any left?

Thanks, I was doing the firmware upgrade when everything went bad, I was only getting throttle responses on the top graph of 55% to 67%. The bike just started acting up. If they can not repair it I will have to replace it with a V I suppose.

So, I ment it was a PCIII, but any way, turns out the PCIII is not working correctly, tech support remoted in to my computer and sure enough it is not doing what it is supposed to. I am going to send it in for repair. I will report back.

So I have a PCIII on my 07 with the wally smoothness map installed, I also have a G3 throttle tube and the slack out of the cables, and the spring unwound. Now I still have some abruptness when coming off idle, or from a throttle closed position. So i played with the CO settings and found...

I want to rebuild my rear shock, I have a 2007, has any one done one? I have experience with dirt bikes and have the nitrogen charging equipment, just need some insight into installing the nitrogen filling valve and disassembly. Any thoughts? Thanks Bob

SOLD

I have a MSL Tripple tree riser for sale little use, it brings the bars up and back, you can check there web sight for dimensions, I would like to get $175 for it, I am trying to post a pic but will have to get back to that.

https://s1050.photobucket.com/albums/s410/Bob_Quale/ I have a Russel with passenger seat for sale, It has little use, I am 200lbs, I would like to get $495 for it, any questions feel free to ask? I am trying to insert an image but having trouble, I will get back to that shortly.

So I'll throw this out there, would you guys buy the PR2s' in the non B version? or recommend another tire that is available? everyone loves the PR2s so I sort of had my heart set on them. Bob