Search results

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. bikerider

    Audiovox Cruise Install Problem

    Took a ride up to see FJRandy today, looking to get some CB advice and test out the cruise control. Here's the scoop on the cruise control: Single vacuum port, no vacuum canister, no relays, resistors or diodes to isolate my BackOff module and the damn thing works, will wonders never cease...
  2. bikerider

    Audiovox CC installed...

    The tool tray?
  3. bikerider

    Audiovox Cruise Install Problem

    Okay now I'm freekin' pissed . . . tried grounding the purple wire and no go so I went to the manual (boy does it pain me to admit that). Anyway, here's the scoop. At the servo connector: black to ground good continuity, red has a constant 12v, ign on or off (might want to fix that), brown...
  4. bikerider

    Audiovox Cruise Install Problem

    It's the one that you have to install the wires into, it comes as a loose connector, no wires at all. Yep, I had the sticking brake pedal problem once also. When I added my peg lowerers(sp?) in March, I had lubed it again.
  5. bikerider

    Audiovox Cruise Install Problem

    No luck on either account. I re-checked all the grounds, all the connections, still have the Back-Off disconnected, no LED tail lights or anything like that. When I start the bike and press the 'ON' button, I can see the LED on the canister light up and then immediately kick-off. If I hold...
  6. bikerider

    Audiovox Cruise Install Problem

    Yes I do, but I've disconnected it to do the diagnostics so that should not be the problem.
  7. bikerider

    Audiovox Cruise Install Problem

    Well, it's actually a problem with my bike I think, an '04 w/ABS. Anyway I tied into the yellow wire in the tail to connect the purple wire from the cruise to and it turns out there's .25 or so freekin' volts in that wire! The cruise will not set because it sees voltage in that wire (I...
  8. bikerider

    '06 & newer fender extenders

    Looking for a fender extender for your '06 or newer FJR? Dandy Industries has 'em in stock and ready for immediate delivery. I just happened to go to the NYC MC show with Howard (the owner) on Saturday and asked him if he had any new FJR stuff. You can tell him I sent you but it won't get you...
  9. bikerider

    Mail-in custom seat experience

    I've done mail in to Russell for my previous Concours and Rick Mayer for my current FJR. Both were no problem what-so-ever. I will say that I personally talked to both before sending the seats in so everyone knew what was expected, timeframe, etc.
  10. bikerider

    Pennsylvania Riders - Check In Here

    Greetings from Allentown. Been lurking a while and decided to register. Later, Bob Held
Top