Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
'06 Magnum blaster installation
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Fred H." data-source="post: 99955" data-attributes="member: 2059"><p>You might want to go find some thin washers and put between the nut and the bracket. If you don't use them, there is a possibility that the nut could pull back through the grommet and the horn would then come out of the bracket. All those two little metal inserts in the grommet do is provide some support for the stud, but it will not prevent the nut from pulling though the back side of the gromment.</p><p></p><p>I just found a real thin washer and used it instead of the OEM washer. Another option would be to remove the grommet altogether and just use a larger diameter washer and bolt it solidly to the bracket.</p></blockquote><p></p>
[QUOTE="Fred H., post: 99955, member: 2059"] You might want to go find some thin washers and put between the nut and the bracket. If you don't use them, there is a possibility that the nut could pull back through the grommet and the horn would then come out of the bracket. All those two little metal inserts in the grommet do is provide some support for the stud, but it will not prevent the nut from pulling though the back side of the gromment. I just found a real thin washer and used it instead of the OEM washer. Another option would be to remove the grommet altogether and just use a larger diameter washer and bolt it solidly to the bracket. [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
'06 Magnum blaster installation
Top