Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
FJR Parts & Accessories Discussions
Aftermarket levers (the cheap ones)
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Fred W" data-source="post: 1326289" data-attributes="member: 3828"><p>I just received my snazzy new silver w/ (2014 appropriate) red adjuster levers. When I put the clutch lever on initially it felt wrong, like it was under a lot of tension in the master even at the home position. I had removed the bronze barrel from the stock lever, cleaned and greased it, tried to align it and insert the plunger from the clutch master, but I don't think the rod went all the way in correctly.</p><p></p><p>I removed the lever, checked it against the stock one for dimensions, then reinstalled it and this time it went together correctly. I can feel that the master has little pressure on it in the home position, and the first few mm of pull are just taking up the slack. You may want to re-try to install your levers too, and pay really close attention to getting that plunger rod in the cup of the bronze barrel all the way.</p><p></p><p>Hope that works out for you.</p></blockquote><p></p>
[QUOTE="Fred W, post: 1326289, member: 3828"] I just received my snazzy new silver w/ (2014 appropriate) red adjuster levers. When I put the clutch lever on initially it felt wrong, like it was under a lot of tension in the master even at the home position. I had removed the bronze barrel from the stock lever, cleaned and greased it, tried to align it and insert the plunger from the clutch master, but I don't think the rod went all the way in correctly. I removed the lever, checked it against the stock one for dimensions, then reinstalled it and this time it went together correctly. I can feel that the master has little pressure on it in the home position, and the first few mm of pull are just taking up the slack. You may want to re-try to install your levers too, and pay really close attention to getting that plunger rod in the cup of the bronze barrel all the way. Hope that works out for you. [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
FJR Parts & Accessories Discussions
Aftermarket levers (the cheap ones)
Top