Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
Ignition Failures
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Cal24Master" data-source="post: 367742" data-attributes="member: 2026"><p>I had the ignition failure on my 06. I had previously checked the zip tie, removed it and put on another one looser. When if failed, I took it apart and a experianced electronics guy said he was sure the problem was that the wire was never properly soldered in the first place. Yamaha is aware of the problem. If you really want to be sure, I would remove the tie wraps and grab the wire harness and pull it really hard out from the ignition. If you have one with a problem it will probably fail right then. If not, just replace the tie wraps and don't worry about it.</p></blockquote><p></p>
[QUOTE="Cal24Master, post: 367742, member: 2026"] I had the ignition failure on my 06. I had previously checked the zip tie, removed it and put on another one looser. When if failed, I took it apart and a experianced electronics guy said he was sure the problem was that the wire was never properly soldered in the first place. Yamaha is aware of the problem. If you really want to be sure, I would remove the tie wraps and grab the wire harness and pull it really hard out from the ignition. If you have one with a problem it will probably fail right then. If not, just replace the tie wraps and don't worry about it. [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
Ignition Failures
Top