Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
Need help with Aux Light install problems.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="fjrpro" data-source="post: 1287512" data-attributes="member: 3925"><p>Thanks guys for ideas, I took a quick look after the game and I moved controller away from the coils. Boom.....Problem number one flickering solved. But still no aux lights when factory bar high berm switch moved to bright position. All wires were double checked and I made all connections with aircraft grade water proof splice butt connectors. I have a wired boat fuse block and Bosch relay installed. This supply's the power and it's even powering all my goodies with no issues for 6 years. I did ground the IQ 175 to the battery. The switch is used to give me three options for lights brightness per Skene instructions. With out the switch, you have bright 100% and user selected amount. I can't seem to locate my shop manual and I loaned out my meter but I assumed the Yellow wire on headlight socket was bright leg/tap. Could it be the green wire?</p></blockquote><p></p>
[QUOTE="fjrpro, post: 1287512, member: 3925"] Thanks guys for ideas, I took a quick look after the game and I moved controller away from the coils. Boom.....Problem number one flickering solved. But still no aux lights when factory bar high berm switch moved to bright position. All wires were double checked and I made all connections with aircraft grade water proof splice butt connectors. I have a wired boat fuse block and Bosch relay installed. This supply's the power and it's even powering all my goodies with no issues for 6 years. I did ground the IQ 175 to the battery. The switch is used to give me three options for lights brightness per Skene instructions. With out the switch, you have bright 100% and user selected amount. I can't seem to locate my shop manual and I loaned out my meter but I assumed the Yellow wire on headlight socket was bright leg/tap. Could it be the green wire? [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
Need help with Aux Light install problems.
Top