Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
Setting sag and preload on new fork springs?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Oso" data-source="post: 1325006" data-attributes="member: 28056"><p>I measured the depth of the fork cap with the preload flush with the bottom of the fork cap. I subtracted that from the fork length from top of spring to top of tube. I don't believe I added the recommended 20mm of preload back to that number. It was a few weeks ago so my memory has faded.</p><p></p><p>But, let's say I didn't add that 20mm, if I had wouldn't my sag be even less than it is now?</p></blockquote><p></p>
[QUOTE="Oso, post: 1325006, member: 28056"] I measured the depth of the fork cap with the preload flush with the bottom of the fork cap. I subtracted that from the fork length from top of spring to top of tube. I don't believe I added the recommended 20mm of preload back to that number. It was a few weeks ago so my memory has faded. But, let's say I didn't add that 20mm, if I had wouldn't my sag be even less than it is now? [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
Setting sag and preload on new fork springs?
Top