Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
Shift pedal pivot bolt
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Constant Mesh" data-source="post: 950235" data-attributes="member: 615"><p>After greasing this pivot and reinstalling the bolt and washers I didn't know how snug it should be. Also the washer locations were a bit uncertain. I had it apart a few years ago and I'm not sure I got the washers right.</p><p></p><p>There are three washers. A larger diameter plate washer with a small hole obviously goes on the outside next to the footrest bracket. The thin wave washer most likely goes against the bolt head. The thin, smaller diameter plate washer goes where? I placed it between the larger washer and the pedal. After looking at the parts diagram it appears it should be placed next to the wave washer. Probably doesn't make any difference.</p><p></p><p>Should the bolt just be snug or would it be better to use a little blue threadlocker?</p><p></p><p>After I put everything back together I noticed in the 2006 Service Manual that they recommend that the two long side stand bracket bolts be installed with threadlocker. My 2004 SM doesn't show threadlocker for these bolts. Has anyone experienced loosening of these bolts?</p></blockquote><p></p>
[QUOTE="Constant Mesh, post: 950235, member: 615"] After greasing this pivot and reinstalling the bolt and washers I didn't know how snug it should be. Also the washer locations were a bit uncertain. I had it apart a few years ago and I'm not sure I got the washers right. There are three washers. A larger diameter plate washer with a small hole obviously goes on the outside next to the footrest bracket. The thin wave washer most likely goes against the bolt head. The thin, smaller diameter plate washer goes where? I placed it between the larger washer and the pedal. After looking at the parts diagram it appears it should be placed next to the wave washer. Probably doesn't make any difference. Should the bolt just be snug or would it be better to use a little blue threadlocker? After I put everything back together I noticed in the 2006 Service Manual that they recommend that the two long side stand bracket bolts be installed with threadlocker. My 2004 SM doesn't show threadlocker for these bolts. Has anyone experienced loosening of these bolts? [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
Shift pedal pivot bolt
Top