Great PCIII map for 06

Hey all, I just got a few maps from Quicksilver for the PCIII, he sent me Wally's map and a Holeshot map, I liked both. However I found Wally's to be too restrictive at high RPM's but I liked the throttle response. The holeshot was incredible at high throttle openings but stumbled a little off idle. So I decided to take the 0-2500 RPM readings from Wally's and pasted them into the holeshot map, the result......... :yahoo:

Smooth off idle throttle and incredible power! BTW it was necessary to converted both of the maps to run on the 06 with a little copy and pasting.

Another BTW... I have Two Brothers pipes, no O2 and stock Air filter.

:lol: :clapping: :yahoo:

csanders99 said:

Hey all, I just got a few maps from Quicksilver for the PCIII, he sent me Wally's map and a Holeshot map, I liked both. However I found Wally's to be too restrictive at high RPM's but I liked the throttle response. The holeshot was incredible at high throttle openings but stumbled a little off idle. So I decided to take the 0-2500 RPM readings from Wally's and pasted them into the holeshot map, the result......... :yahoo:
Smooth off idle throttle and incredible power! BTW it was necessary to converted both of the maps to run on the 06 with a little copy and pasting.

Another BTW... I have Two Brothers pipes, no O2 and stock Air filter.

:lol: :clapping: :yahoo:

Click to expand...

Any chance that you could make that available for download? Especially in the '03-05 format?

Fred W said:

Any chance that you could make that available for download? Especially in the '03-05 format?

Click to expand...

The 06 format would be much appreciated as well.

Fred W said:

csanders99 said:

Hey all, I just got a few maps from Quicksilver for the PCIII, he sent me Wally's map and a Holeshot map, I liked both. However I found Wally's to be too restrictive at high RPM's but I liked the throttle response. The holeshot was incredible at high throttle openings but stumbled a little off idle. So I decided to take the 0-2500 RPM readings from Wally's and pasted them into the holeshot map, the result......... :yahoo:
Smooth off idle throttle and incredible power! BTW it was necessary to converted both of the maps to run on the 06 with a little copy and pasting.

Another BTW... I have Two Brothers pipes, no O2 and stock Air filter.

:lol: :clapping: :yahoo:

Click to expand...

Any chance that you could make that available for download? Especially in the '03-05 format?

Click to expand...

+1

I'd like to try them out. I've only used the stock map.

Wally's map is smooth but my 05 back fires when I let off the gas, would like to try your map if it would gel with an 05, Muzzy 4-1 and UNI foam filter?

Even willing to pay for it if needed.

Gracias

Tmex

How do I make the maps downloadable on this post? I don't have a web page so I'm not sure.

csanders99 said:

How do I make the maps downloadable on this post? I don't have a web page so I'm not sure.

Click to expand...

Here you go:

Holeshots Map

Wally Smoothness Map

Wally Holeshots Combo Map

Thanks Charles!

Thanks to both of you! I've been hoping for a better map to try out.I had mine dyno-tuned and I think he just went after big #'s and did very little with the bottom end where the troubles are.Thanks again!

Anyone have the 2006/2007 Muzzy map for their slip-ons? I emailed them after I didn't see it on their web site and haven't received a response. I'm interested in seeing how it compares to the maps above.

new to the whole mapping thing. Will these 06 maps work on an 07?

sittonb said:

new to the whole mapping thing. Will these 06 maps work on an 07?

Click to expand...

Power Commander maps for the 02-05 are compatible with each other and maps designed for the '06 work on the '07 and vice versa.

So which map is for the 06/07 or are they all for the 06/07?

I lost track when the 05 was listed.

Thanks in advance.

hh

The maps bmwhd posted are for the 06, they will not work on an 03-05. I converted 03-05 maps into the 06 format. The 03-05 holeshot map is available from the PCIII website and Wally's is available on this forum or PM me with your email address, I still have the 03-05 version plus a few others that Quicksilver sent me.

got it. Thank you.

hh

Big Thanks to csanders99 for converting Wally's map to the '06 format (duh - why didn't I think of that) - and to bmwhd for hosting the maps. I just thought I had this thing running smooth after using Rad's latest TBS sync method, but this was the final touch. I now have almost zero vibration/buzziness - especially at 4000-4200 rpm.

Thanks again! :yahoo: :yahoo: :yahoo:

bmwhd said:

csanders99 said:

How do I make the maps downloadable on this post? I don't have a web page so I'm not sure.

Click to expand...

Here you go:

Holeshots Map

Wally Smoothness Map

Wally Holeshots Combo Map

Thanks Charles!

Click to expand...

Is this wally's smoothness map for the 03/05 - or is this the one tht is converted for an 06/07?

And if not, Where do I download the 06/07 wallys that has been converted?

I made a combined map (Holeshot/Wallys) last year, Mine however switches at the 3500 rpm level. I know Bounce has used it, but never got any feedback from him on it.

See post above, the maps bmwhd posted are for the 06/07, the combo map is the one where I pasted the first 0-2500 rpm readings from Wally's map into the holeshot map, that's the one I'm running now.

csanders99 said:

See post above, the maps bmwhd posted are for the 06/07, the combo map is the one where I pasted the first 0-2500 rpm readings from Wally's map into the holeshot map, that's the one I'm running now.

Click to expand...

For those who are using the Wally's smoothness map, do you have "accelerator pump" enabled also. Looking at the first column of the map, it looks like it might do the same thing as AP.