Recent content by gotfz1

Another five year bump. Mainly to say thanks to OP for the thread and follow up. Don't post much here but shortly after a valve clearance check developed the same leak on my '05 with 40k miles. Was at first thinking the reinstall of the coolant pipe during maintenance had gone awry but once...

Congratulations on your thread crap. Wait till you try to sell something :)

Thankfully Fairbanks Walmart didn't have this policy last August. I was carrying leak proof contractor's bags just in case but they brought us out a drain pan and rags and such. The change was no different than had it been done in a garage. Daniel, it's ok to take your meds man.

I thought that but after many many rider meetings the mob has convinced me the number one reason to be there is to get a knee down :)

They designate traffic islands (whether there's an actual island or not). The local boards are full of riders that insist on using them then complain when they get cited. I avoid them.

Do they? The young kids say the darndest things.

Skagit is my favorite place to need a new tire on the way back from Alaska :laugh:

If you want to transit LA direct and avoid traffic I'd plan for 9p-5a and monitor the Caltrans highway conditions page for night time closures/construction. If you're inexperienced or uncomfortable with lane sharing prefer routes with carpool lanes. Helps to be aware of the typical flow during...

Always good prices and fantastic service. Still have the used Vanson purchased 15 years ago when that was their primary biz. Since then they're the source of most of my apparel.

Most DOT rubber is designed to get up to operating range fast. Gassing, heat cycles, cockles, mussels... If rider A and rider B cover the same distance and all else being equal rider A's tires fully cycle three times... What about the guy that coasts to every stop to save his back tire...

Haven't been there since August. It only seems like forever :)

The internet is relieved you cleared that up.

I've used the Koss VC 20 ($10 from amazon) on a couple bikes. I couldn't find anything truly oversized for easier operation with gloves but mounted under the LH switch gear and could drag my gloved thumb across it without removing fingers from grip without issue.

Er, have you read OP? I was in the same situ.

Ended up returning the bag liners and using Aerostich LP bags.