metalman

I have fan cooled LEDs in both my '07 and my '13. no problem with fitting at all.

Not sure but the wiring might be a problem with using the fan version. There’s not much room around the unit when installed.

When you go to install them you’re going to swear they won’t fit…..but they do. 🤔 Also, it took me several attempts to get the cut off...

That's the same link TWO has in his description. Note: that link has 4 styles. He specifically refers to the last one, the fanless option.

I tried out the LED conversion suggested by twowheelobsession on YouTube. He hit a home run with this. A bit fiddley to get adjusted but...

Are you talking about the relay arm? (Three bearings and connects to the bike frame, shock and dogbones.) That absolutely needs to be...

Mine on my 2014 A that had been sitting for outside under a cover for 6-7 years was stuck and I completely disassembled it too. It s a...

Yeah….I found that out!! $180 + freight.

no, i took the switch out so that could ride back home, but the switch only can not be bought. the dealer replaced the control assembly...

That’s what I found when researching a replacement. I interpreted Bonami00’s post to mean he had actually replaced just the switch…..my bad.

Where did you find just the switch?

Went at the emergency flasher switch this morning. Disassembled the housing to get directly to the switch. Of course it's the very...

Yep what Russ said. Just because the button is not stuck doesn't mean the contacts aren't. Open up the housing, spray with contact...

I’ll have a go at it…Thanks!

Took the '14ES out today for a 300+ mile run. Stopped on a narrow shoulder to snap a photo. Left the bike running and turned on the...