Recent content by tiz

******* SOLD *********

The oxford grips have auto-off. Doesn't need a relay. Just connect to battery. My 2008 is done that way. --Kevin

23962 miles - should not increase Hyperpro front springs and setup stock rear shock 3600 lumen h4 replacement headlamps x2 Bark buster “ Blizzard “ universal handguards (cold weather hand comfort) Billet aluminum 90deg tire valves Tires : rear : Michelin pilot road 4 190/55zr17 75w. : front ...

Ignacio i guess you're just better than me. Rosskean - thanks thats what i needed. --Kevin

I don't want to discuss battery technology. I want the most powerful AGM battery that fits the 2008 FJR1300 properly. I did search. Unable to find anything helpful on this subject. --Kevin

I would be interested if the shock is not already taken.  Milford ct 06461.  I have PayPal or Venmo. —Kevin

+1 on the barkbuster blizzards.  Got mine several years ago.   Easy on/off.  Work well. --Kevin

I had a Shoei Multitec XL and ended up in a Neotec 2 L. Same size head. The Neotec 2 seems snug but probably fits better than the Multitec did. --Kevin

Interested in the stock seat. Am I correct that it is both front and back for $100? --Kevin

I tried via text and phone calls and reached him. After looong discussions he's afraid of paypal/checks/whatever. Won't quote shipping. Too much trouble. Not worth the hassle. --Kevin

Any chance of selling the rear shock separate? I already have the HP front springs and setup. I have a 2008 Gen II in CT. --Kevin

I have the barkbuster BBZ multi fit on my 2008. Works great. --Kevin

Been on to other things for a while - sorry for the lack of reply. I'll try to get a picture, but before I open it up again I'll need to source some new hoses to make new lengths from the restrictors to the nipples. I recall getting the gauge used. Maybe the PO somehow stretched out the ends...

I finally did a TB sync last night on my 2008 FJR. I have a brand-new carbtune gauge. I found the hoses were very hard to get on to the #3 and #4 nipples due to an adjacent hose on each TB. Also the carbtune hoses seemed quite loose on the vacuum nipples and could easily be displaced to the...

Same here. Got the springs from EPM. Had some discussion with Klaus as I ran out of oil from the kit they sent. Not sure what happened but my air gap is fine with a few oz of extra oil.. This was two seasons ago and it has been fine. I did have a shop replace the seals and bushings while...