08 Throttle Body Synchronization

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

HuskyRider

Well-known member
Joined
Mar 26, 2008
Messages
260
Reaction score
144
Location
Roseville, CA and Grangeville, Idaho
Sync'd my throttle bodies today, took about 45 minutes not knowing what I was doing. The 08 does have a heat shield below the tank, which necessitates removing the t-bar also, all easy stuff. Turned out to be just practice, the throttle bodies were synchronized perfect. Now the 600-mile service is done and I can just ride! :D

 
Sync'd my throttle bodies today, took about 45 minutes not knowing what I was doing. The 08 does have a heat shield below the tank, which necessitates removing the t-bar also, all easy stuff. Turned out to be just practice, the throttle bodies were synchronized perfect. Now the 600-mile service is done and I can just ride! :D
Cool...and you don't even have to remove the t-bar/heat shield...just lift the back end of the heat shield up and fold it over on itself...there's enough room to access the vacuum ports and adjustment screws.

 
Top