• If you have bought, sold or gained information from our Classifieds, please donate to FJRForum and give back.

    You can become a Supporting Member or just click here to donate.

Parts For Sale 2012 FJR Brake Parts, Controls, Wiring, Complete Engine + more

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TooManyBikes

Well-known member
Joined
Dec 22, 2017
Messages
110
Reaction score
60
Location
Torrance, Los Angeles, CA
UPDATED 9/27/22 THANK YOU to the many forum members who inquired and purchased parts. So many parts have been sold that this thread is being closed. A new thread will be opened to list the remaining parts.

Bought a wrecked 2012 FJR for some specific low mileage parts. Selling off parts in good condition that I do not need.
  • Brake calipers - front and rear
  • Brake disks - front and rear
  • Wiring, handle bar controls, etc. - What do you need?
  • Engine - Fits all Gen 2 and Gen 3 except AE (See: Engine Swaps ) - $800 Blackstone oil analysis said, “There aren't any signs of poor wear or mechanical trouble in the levels or the balance of wear metals. In addition to the good news about the engine's condition, the oil is physically fine…”
Numerous other pieces. Photos available. PM for details.
  • SOLD - Rear wheel and Michelin Road 5
  • SOLD - Front wheel
  • SOLD - Fork tube caps
  • SOLD - Dynojet Power Commander V P/N 22-017 fits 2006-2012 FJR models
  • SOLD - Fuel pump
  • SOLD - Throttle bodies
  • SOLD - Dale Walker Holeshot Performance Slip Ons
Do not know bike's miles as dash was damaged, but bike appears it had very little use and was well cared for:
  • Michelin Road 5 rear tire is barely worn
  • Custom exhausts are matched with a Power Commander V
  • Brakes and rotors are in excellent condition
  • Brake and clutch fluid are very clear, meaning low mileage or careful maintenance
  • Fuel pump looks fresh with no discoloration of plastic
  • No signs of extensive wear or grime build up on any parts of the bike.
All prices plus shipping from Los Angeles Zip 90275
 
Last edited:
Bought a wrecked 2012 FJR for some specific low mileage parts. Selling off parts in good condition that I do not need.
  • Front Wheel with bearings $100
  • Front seat $100
  • Dynojet Power Commander V P/N 22-017 fits 2006-2012 models $175 - Retail on most sites at $350+
  • Dale Walker Holeshot Performance Slip Ons with shiny black body and chrome ends. One looks very good. One has slight dents. $150 for one or both.
  • Power Commander and slip ons together $275
  • Fuel Pump - Make offer
  • Engine Fits all Gen 2 and Gen 3 except AE (See: Engine Swaps ) - $800 Blackstone oil analysis said, “There aren't any signs of poor wear or mechanical trouble in the levels or the balance of wear metals. In addition to the good news about the engine's condition, the oil is physically fine…”
  • Frame with bill of sale and salvage certificate. May be titled as Rebuilt or similar in several states - Make Offer
  • Rear wheel and Michelin Road 5 - SOLD
Do not know bike's miles as dash was damaged, but bike appears it had very little use and was well cared for:
  • Michelin Road 5 rear tire is barely worn
  • Custom exhausts are matched with a Power Commander V
  • Brakes and rotors are in excellent condition
  • Brake and clutch fluid are very clear, meaning low mileage or careful maintenance
  • Fuel pump looks fresh with no discoloration of plastic
  • No signs of extensive wear or grime build up on any parts of the bike.

Numerous other pieces. Photos available. PM for details.

All prices plus shipping from Los Angeles Zip 90275

Will eventually post on Craigslist but wanted to give Forum members first shot as you have all been so helpful to so many others.
the Dyno Jet Power Commander? Is it Dale's Map?
 
Thanks for asking. Previous owner installed all the farkles and was quite thorough. Not certain it is Dale's map, but suspect it well could be.

Fortunately, the PC-V is easily tunable for any map variations, and resetting to default values.
 
Last edited:
How about the Throttle Bodies?

Thanks for asking about the throttle bodies. Certainly would be glad to sell them after the engine is sold. For now, it seems best to give the engine buyer first chance at the fueling system. Feel free to PM me however, if getting the throttle bodies now is v. important to you and we can discuss.
 
Ryder, thanks for your note. Here are the exhausts in their current condition.

If they do not sell readily when I return, I will rebuild them to look like new before listing them.

The 17" long and 4" diameter thin wall stainless steel tubes are often available at a steel supplier in the cut-off bins. It is a simple task to do a 60% gloss black powder coat, pop rivet the polished end caps, and have them looking like new.

Stainless tubes and mounting hardware
1635741867-PXL_20210923_072630503.jpg

Intact muffler
1 Good can  No dents Needs respray A.jpg

Dented muffler
2 Dented Can A.jpg
 
Last edited:
Top