Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
FJR Parts & Accessories Discussions
Audiovox Cruise install troubleshooting help.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="derm75" data-source="post: 1323383" data-attributes="member: 89743"><p>Hey all, new member here looking for advice. I have installed the Audiovox cruise control on my 2005 and it isn't working. I followed the excellent write ups of a couple members here but the cruise does not seem to engage. I have lights on the control panel, so I don't think power is the issue. I have verified vacuum with a gauge while the bike was running. I used a fuel filter as a vacuum reservoir and a PCV valve, but it doesn't appear to hold vacuum after I shut off the bike. I have tried two different valves with the same results. If the clamp the hose with a pliers and turn off the bike the vacuum holds. Regardless, my understanding is that the vacuum shouldn't cause the cruise not to work, it just makes it work more effectively on hills. Yes? My switches are set with #'s 1, 4, and 7 ON and #'s 2, 3, 5, and 6 off. What else should I check? Thanks in advance.</p><p></p><p>Jeremy</p></blockquote><p></p>
[QUOTE="derm75, post: 1323383, member: 89743"] Hey all, new member here looking for advice. I have installed the Audiovox cruise control on my 2005 and it isn't working. I followed the excellent write ups of a couple members here but the cruise does not seem to engage. I have lights on the control panel, so I don't think power is the issue. I have verified vacuum with a gauge while the bike was running. I used a fuel filter as a vacuum reservoir and a PCV valve, but it doesn't appear to hold vacuum after I shut off the bike. I have tried two different valves with the same results. If the clamp the hose with a pliers and turn off the bike the vacuum holds. Regardless, my understanding is that the vacuum shouldn't cause the cruise not to work, it just makes it work more effectively on hills. Yes? My switches are set with #'s 1, 4, and 7 ON and #'s 2, 3, 5, and 6 off. What else should I check? Thanks in advance. Jeremy [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
FJR Parts & Accessories Discussions
Audiovox Cruise install troubleshooting help.
Top