War Machine
Zero Altitude Test Pilot
Finally installed Blue Flame slipons on my '08, Totally Awesome. Completely changed the attitude of this bike.
Already had a K&N air filter and PCIII with a stock map and bike ran extremely well. Decided to install map M419-02 (Gen II bike with 2 Brothers slip ons). I set the throttle position before installing the map, & was very surprised at the ease of setting the throttle position & installation of the map. The bike now feels like a torque monster at any RPM & above 5 Grand....OMG!
My only reservation I have about this map is I noticed that the bike runs hotter in mild traffic with outside temps of only mid 70's & I'm concerned about the extra heat since the hottest part of summer is yet to come.
Is there a map that would be a compromise between all that power so I could run a little leaner at highways speeds?
I really don't want to go the tuner route.
PS here's a recent pic:
Already had a K&N air filter and PCIII with a stock map and bike ran extremely well. Decided to install map M419-02 (Gen II bike with 2 Brothers slip ons). I set the throttle position before installing the map, & was very surprised at the ease of setting the throttle position & installation of the map. The bike now feels like a torque monster at any RPM & above 5 Grand....OMG!
My only reservation I have about this map is I noticed that the bike runs hotter in mild traffic with outside temps of only mid 70's & I'm concerned about the extra heat since the hottest part of summer is yet to come.
Is there a map that would be a compromise between all that power so I could run a little leaner at highways speeds?
I really don't want to go the tuner route.
PS here's a recent pic:
Last edited by a moderator: