• If you have bought, sold or gained information from our Classifieds, please donate to FJRForum and give back.

    You can become a Supporting Member or just click here to donate.

Gen II lower fork tubes

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PredsFan

Member
Joined
Apr 7, 2018
Messages
7
Reaction score
0
Location
Nashville, TN
I need the lower fork tubes, both of them, that will fit my 2008AE. Lucky guy that I am, both of them got stripped when removing that bottom damper bolt. YAY ME!

 
Maybe I didn't do that. It seems that cartridge is spinning inside with the bolt. Might just need the damper rod removal tool, YM-01447. I'll also take one of those or advice on where to find them.

Robert

 
You can make your own damper removal tool. (3/8" drive welded to a 3/4" pipe welded to a 26mm socket)

 
Last edited by a moderator:
Thanks. I knew you could but didn't have the specs. I don't have a welder, and can't weld, but I know someone who does.

 
Top