Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
FJR Parts & Accessories Discussions
Heated Grips
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="road runner" data-source="post: 811731" data-attributes="member: 5116"><p>I didn't buy the kit from W&S, just the troller, but the elements may be the same as the Dual Star.</p><p></p><p>What you have sounds a little low, but it may be OK. Do you have a good power supply? What you can do to get a little more heat from the clutch side is remove the element (be careful removing the element, you may need a heat gun), put a couple layers of electric tape on the bar, then put the element back on using some elec tape to hold each end. This will help to keep the heat from going into the bar.</p><p></p><p>Also if you have a good power supply then you can hook the blue & red wires together. It is to much for a 5 amp fuse, but a 10 amp does the trick. Here's an article with a chart of wiring combos <a href="https://www.fjr1300.info/mods/tom3.html" target="_blank">FJR 1300 info</a> This does get very hot, so the elements may not last as long, but they do get hot.</p><p></p><p>Edit; I wouldn't hook the red & blue together unless you have a troller, so you can better regulate them.</p></blockquote><p></p>
[QUOTE="road runner, post: 811731, member: 5116"] I didn't buy the kit from W&S, just the troller, but the elements may be the same as the Dual Star. What you have sounds a little low, but it may be OK. Do you have a good power supply? What you can do to get a little more heat from the clutch side is remove the element (be careful removing the element, you may need a heat gun), put a couple layers of electric tape on the bar, then put the element back on using some elec tape to hold each end. This will help to keep the heat from going into the bar. Also if you have a good power supply then you can hook the blue & red wires together. It is to much for a 5 amp fuse, but a 10 amp does the trick. Here's an article with a chart of wiring combos [URL="https://www.fjr1300.info/mods/tom3.html"]FJR 1300 info[/URL] This does get very hot, so the elements may not last as long, but they do get hot. Edit; I wouldn't hook the red & blue together unless you have a troller, so you can better regulate them. [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
FJR Parts & Accessories Discussions
Heated Grips
Top