Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
FJR Parts & Accessories Discussions
I Need Help/Direction on Highway Peg Installation Please
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="HotRodZilla" data-source="post: 1380902" data-attributes="member: 13519"><p>"Taking the plastic off" is not required. Removing enough bolts to pull it out without breaking the plastic IS! Don't forget there are screws under the adjustable fairing piece that keep the main fairing held down pretty well. If I remember right, I had to take out one or both of those screws in order to get enough room.</p><p></p><p>If you haven't removed the adjustable piece before, just be gentle. It will "fold" out, and they are held on the bottom with flimsy little plastic tabs. If you don't finesse it out, you can snap that little tab, which will lead to you losing the entire piece at FJR nominal speeds. When you reassemble, put a litle grease on that cross piece that snaps into the metal tab, and it'll make life easier.</p><p></p><p>Hope that helps! Also, don't worry about people bitching at you. Unless it's a LOT of us. Haha...</p></blockquote><p></p>
[QUOTE="HotRodZilla, post: 1380902, member: 13519"] "Taking the plastic off" is not required. Removing enough bolts to pull it out without breaking the plastic IS! Don't forget there are screws under the adjustable fairing piece that keep the main fairing held down pretty well. If I remember right, I had to take out one or both of those screws in order to get enough room. If you haven't removed the adjustable piece before, just be gentle. It will "fold" out, and they are held on the bottom with flimsy little plastic tabs. If you don't finesse it out, you can snap that little tab, which will lead to you losing the entire piece at FJR nominal speeds. When you reassemble, put a litle grease on that cross piece that snaps into the metal tab, and it'll make life easier. Hope that helps! Also, don't worry about people bitching at you. Unless it's a LOT of us. Haha... [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
FJR Parts & Accessories Discussions
I Need Help/Direction on Highway Peg Installation Please
Top