Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
Stock Mirrors not working for me
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="bluesdog" data-source="post: 1091454" data-attributes="member: 25896"><p>^^ Pretty much it.</p><p></p><p>On my '11, the screw under the glove box lid is a hex head, and I don't remove the other x-head/phillips at the inside, (the edge-on one), because it just holds the grip warmer unit onto the panel.</p><p></p><p>I unscrew the headlight cable connector from the underside. It's tricky to get it threaded on again, but easier imo than trying to line up the cable to the knob if taken off that way. To make things a bit easier, I use zip ties on the cables just below the knurled fasteners, to prevent the fasteners from sliding down along the cable.</p><p></p><p>I unplug the grip heater control unit, because the dangling part has metal bits which can scratch the finish on the fairing around the glove box.</p><p></p><p>The left front panel requires a bit more flexing to remove than the right one, as the glove box interferes. It will come off/out, though. Just be patient.</p><p></p><p>HTH</p></blockquote><p></p>
[QUOTE="bluesdog, post: 1091454, member: 25896"] ^^ Pretty much it. On my '11, the screw under the glove box lid is a hex head, and I don't remove the other x-head/phillips at the inside, (the edge-on one), because it just holds the grip warmer unit onto the panel. I unscrew the headlight cable connector from the underside. It's tricky to get it threaded on again, but easier imo than trying to line up the cable to the knob if taken off that way. To make things a bit easier, I use zip ties on the cables just below the knurled fasteners, to prevent the fasteners from sliding down along the cable. I unplug the grip heater control unit, because the dangling part has metal bits which can scratch the finish on the fairing around the glove box. The left front panel requires a bit more flexing to remove than the right one, as the glove box interferes. It will come off/out, though. Just be patient. HTH [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
Stock Mirrors not working for me
Top