Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
STS Turn Signal Harness for Gen 3 FJR1300
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="RiderJoe" data-source="post: 1442139" data-attributes="member: 93203"><p>I don't have access to a Gen 3 FJR, or a wiring diagram for it. However, this video on YouTube from <a href="https://youtu.be/R6G1arr-3Qs" target="_blank">TwoWheelObsession</a> gives indication that the wiring loom for the turn signal changed significantly from the Gen 2 models. If the connector type can be identified, and is available somewhere (EasternBeaver? - it looks very much like this <a href="https://www.easternbeaver.com/Main/Elec__Products/Connectors/Sealed/TS025/ts025.html" target="_blank">Sumitomo TS025</a> - 10 position one from the video, but I am not sure), then a similar harness can be made for Gen 3 too. The difference seems to be that the connector on the Gen 3 is only a 10-pin connector, which is very different from the 13-pin connector on the Gen 2, and is accessible at a different location on the bike. Bryan in the video mentions that there isn't space to mount the STS properly where the connector is, but the leads are long on the STS harness to mount it at a nearby place, and even if it isn't, the wiring from the plug-in harness can be made long enough to be able to mount the STS at a suitable place.</p><p>Good luck!</p></blockquote><p></p>
[QUOTE="RiderJoe, post: 1442139, member: 93203"] I don't have access to a Gen 3 FJR, or a wiring diagram for it. However, this video on YouTube from [URL='https://youtu.be/R6G1arr-3Qs']TwoWheelObsession[/URL] gives indication that the wiring loom for the turn signal changed significantly from the Gen 2 models. If the connector type can be identified, and is available somewhere (EasternBeaver? - it looks very much like this [URL='https://www.easternbeaver.com/Main/Elec__Products/Connectors/Sealed/TS025/ts025.html']Sumitomo TS025[/URL] - 10 position one from the video, but I am not sure), then a similar harness can be made for Gen 3 too. The difference seems to be that the connector on the Gen 3 is only a 10-pin connector, which is very different from the 13-pin connector on the Gen 2, and is accessible at a different location on the bike. Bryan in the video mentions that there isn't space to mount the STS properly where the connector is, but the leads are long on the STS harness to mount it at a nearby place, and even if it isn't, the wiring from the plug-in harness can be made long enough to be able to mount the STS at a suitable place. Good luck! [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
STS Turn Signal Harness for Gen 3 FJR1300
Top