Turn signal cancel module

[redneckj]

I need to add a turn signal cancel module to my 2010 FJR. I am looking at the Kisan SM-3. It appears to be a plug and play module. Is there a better option that you have installed on your bike? If so, please post. Thanks in advance!

 

[Cyclepath]

I've previously wondered about this too.

 

[Brodie]

I have one on my 08. Its a good unit, but not quite plug and play. You need to run a ground wire to it for full functionality.

If you get it, the neoprene bits works best on the switch return. I also have mine set for 20 flashes before cancelling.

If you only need a couple of flashes, just hold the switch with your thumb until youre done, it will cancel right away when you let go.

Brodie.

?

 

[lnewlf]

happy with mine....plug & play if you don't mind it cancelling after @ 40 seconds...just remove stock flasher and replace with the Kisan...or you can do the more involved installation. hazards will cancel too with the plug & play installation..

 

[DesignFlaw06]

Probably late to the party and you already put something on, but I added this one to mine https://safer-turn.com/smart-turn-system/ and am pretty happy with it. There was a write-up on it, but I can't find it on this forum. Here's a link to it on the other forum: https://www.fjriders.com/forums/viewtopic.php?f=20&t=2378

I premade the harness so I could just snap it into place. Been working great for 3+ years now.

 

[RossKean]

There was a write-up on it, but I can't find it on this forum.

A cool "new" feature of the current forum incarnation is the ability to search on a three letter term! (I love this!)

Search STS and all references pop up!