US Source for Euro Style Passing Switch?

[skyway]

You know that little yellow switch on the left side housing. Anyone know where I can get one? I don't care if it doesn't have the correct wiring for the intended purpose of flashing the brights, I plan to use it for something else.

 

[Toecutter]

Does it need to be a momentery switch? If not, I sourced one locally, just on-off.

 

[HIGHLANDER]

https://www.fjrforum.com/forum//index.php?s...1&hl=rocker

There's a nice switch in this write up, not a momentary tho ??? B)

 

[Toecutter]

https://www.fjrforum.com/forum//index.php?s...1&hl=rocker
There's a nice switch in this write up, not a momentary tho ??? B)

That's the one I found, only it's a different mfg. with the same specs.

 

[Rickster]

seems odd. seems like you could get the euro assembly, and not fritz with it, and get the MON at the same time. can't find a link though... good luck!

 

[HIGHLANDER]

The Euro forum posted last year tht the switch, ( with housing etc ) is over two bills !! :blink:

 

[Rogue]

Check this out: https://www.nkkswitches.com/pdf/MrockersSnapin.pdf

Could work.

 

[3dogs]

I used a Radio Shack switch/button (cost about $3.00) and wired it to the hi beam switch in the control. It's mounted about where the real flash-to-pass switch goes. It's been work for 2 years with no problems.