• If you have bought, sold or gained information from our Classifieds, please donate to FJRForum and give back.

    You can become a Supporting Member or just click here to donate.

WTB Gen 2 clutch slave cylinder 2D2-16381-00-00. Operational, of course! :)

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Most likely just the seal. The piston and 'seal' easily separated to two pieces.. just held it upside down and bang..

I have a used gen 1 will try it <again> but recall the engagement point too close to handlebar.

Looked at parts fiche, does not appear seal alone is available.

BTW, it's a well trained FJR that fails when on the lift, not on the road! (y)
 
Don,
I have a gen1 which will work, it has an easier pull than gen2, I had a gen 1 on my 06.
let me know if you want it. PM me
Thanks ahchiu.. I have a gen 1 SC but don't like the (dis)engagement point... and the system is clean and purged. Pazzo levers. Just a little drag with lever all the way in... But Thank You for the offer!
 
Top