• If you have bought, sold or gained information from our Classifieds, please donate to FJRForum and give back.

    You can become a Supporting Member or just click here to donate.

WynPro ( BIG-FOOT)

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Love mine! The bottom of my stock side stand pad was not completely flat. I almost lost my BigFoot on the first trip after installing it because it rocked and worked the screws loose. I re-installed it with JB Weld added in between the bottom of the side stand and the BigFoot. No problems since!

https://koczarski.com/2016-yamaha-fjr1300es/wynpro-big-foot

 
Last edited by a moderator:
Love mine! The bottom of my stock side stand pad was not completely flat. I almost lost my BigFoot on the first trip after installing it because it rocked and worked the screws loose. I re-installed it with JB Weld added in between the bottom of the side stand and the BigFoot. No problems since!
https://koczarski.com/2016-yamaha-fjr1300es/wynpro-big-foot
I know it's been said in the 33 pages of this thread before, but bears repeating--good idea to Loctite the screws (blue is fine, but red too, since you won't ever want to take it off). The cure for a rocking Bigfoot is a very few seconds with an angle grinder if you have one--or your buddy does. At least 100,000 miles on the two I've had on two FJRs (transferred the first one to the second bike before I sold it). Kudos to the Bigfoot!

 
Love mine! The bottom of my stock side stand pad was not completely flat. I almost lost my BigFoot on the first trip after installing it because it rocked and worked the screws loose. I re-installed it with JB Weld added in between the bottom of the side stand and the BigFoot. No problems since!
https://koczarski.com/2016-yamaha-fjr1300es/wynpro-big-foot
I know it's been said in the 33 pages of this thread before, but bears repeating--good idea to Loctite the screws (blue is fine, but red too, since you won't ever want to take it off).
I don't remember which color of loctite I used, probably blue, but it didn't work!? I was amazed to find my BigFoot dangling from the side stand after a coupe of thousand miles. Didn't have access to a grinder so I went for the layer of JB Weld to fill the gaps.

 
Like the belt and suspenders guy, what's wrong with grinding, loctite AND JB Weld?

Anyway, if you don't have a grinder, just put the kickstand down as you ride down the road for a couple miles. Nice and flat.
smilingsmiley.gif


 
Dave, Do you have any Gen1 in stock? Side stand pads

John

 
Last edited by a moderator:
Emailed about a Bigfoot and got this back

Sorry, I am not selling any products at this time.
 
Thanks, David D Wynne
 
 
Status
Not open for further replies.

Latest posts

Top