Yamaha Trunk Lock

So I get my trunk today from another forum member, and I dig out the lock that I got with my bike. I need to get the back of the lock off to fit it in the hole but the two little screws that hold it in are a little wierd. They obviously take a torx bit, but there is a post in the middle of the hole so a normal torx wont work. I would need a torx with a hole drilled out of the middle of it.

Does anyone know the name of this phantom torx tool? I stopped by my local Home Depot and showed the guy and he looked at me like I had two heads (of course, to be fair I do seem to get that alot). :dribble:

They are anti tamper or tamper proof torx .

Anti Tamper Torx at Sears

HYCLE said:

They are anti tamper or tamper proof torx .
Anti Tamper Torx at Sears

Click to expand...

Excellent, thank you.

For what it's worth, I had my trunk lock rekeyed by a locksmith to match the ignition for $25

Next time try this if all else fails.

mfletch69 said:

For what it's worth, I had my trunk lock rekeyed by a locksmith to match the ignition for $25

Click to expand...

I bought mine new so it came with the lock for the trunk that is keyed to the ignition.