Problem w/ Givi 52 case and Admore light kit. Help!

My new to me, used Give 52 top case came with an Admore full lighting kit with running, signal and brake lights. I cannot get the right side to light up equally with the left side. First there were 3 small led lights in the outboard that did not work as well, as the low illumination problem on he right side.. Admore sent both inside and outside wiring harnesses and the right side led light panels which I have replaced. I now have all the lights working but the right side is very dim.

I have reviewed it with my very experienced mechanic and we are stumped. Is there any chance that the power source wiring in the tail is incorrect? Anyone seen a similar problem? Sure would like to correct this before leaving on my 50/60/70 ride on the 25th.

Thanks!

When I get weird stuff like that I've learned to go after grounds first.

also check that the polarity is correct cause LED's are one way only

Did you get the FJR specific wiring adapter or just tapping OEM wiring? I used the former and installation was painless!

Good luck on the 50/60/70 Ralph!

--G