Longer hoses for ABS

Advertise with us!
Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Greenham

Greenham

Well-known member
Joined
Jun 1, 2015
Messages
61
Reaction score
7
Location
Raleigh NC
Does anyone know if I could/can get longer hydraulic hoses for the clutch and front brake fro my 2005 ABS? I want to get a little more free play after installing 2 risers...

It's a 2005 ABS. Anyone know if the ABS would be a problem for the front brakes

Thanks as always.....

 
Back when we did a GB for brake lines in Gen 1 days...the manufacturer offered an option to make some custom extended lines. I'd try the majors to see....i.e. Spiegler, Galfer and the others.

 
Last edited by a moderator:
Don't know whose bike it was, but someone at the Reuben Run last weekend had extensions on their hydraulic lines. don't know the particulars though. Don't even remember for sure if it was an FJR. Looked easier than replacing entire line though.

 
Last edited by a moderator:
Take your lines to a local hydraulic shop.

If they are like mine they can extend them as needed and then test and DOT certify them.

I didn't need to do it on my FJR but did on my Roadstar Warrior, they brazed a new fitting onto one of the steel blocks and then built me a S/S line with the appropriate banjo fittings on the ends.

 

Similar threads

CGS
ABS brake issues
Replies
19
Views
1K
Whooshka
Whooshka
chazglenn3
Strange Issue...ABS Light Steady and Stumbling
Replies
18
Views
1K
chazglenn3
chazglenn3
S
2007 waits until water pump failure doesn't create a disaster
2
Replies
38
Views
2K
an-guy
an-guy
OregonRider
Motorcycle For Sale SOLD 2008 FJR 1300 ABS
Replies
0
Views
537
OregonRider
OregonRider
T
Parts For Sale Moving - Must Empty Garage! Parting with spare 2006-2015 engine, ECU, brakes, and other parts $300
Replies
0
Views
236
TooManyBikes
T

Latest posts

Top