Gen 1 Compression Valve

So, today I was disassembling my forks to replace the seals. First fork went fine. The second one I had to use my electric impact gun to remove the lower sealing bolt because it was spinning from the inside. Long story short, I had the gun on tighten instead of loosen and snapped off the threads of my compression valve. Does anyone have a Gen 1 compression valve lying around I can buy off them? I don't know what else I can do other than upgrade to racetech at this point.

Not the first time I have heard of this. Check Ebay for a used one.

Canadian FJR

I have a pair of them sitting in my attic, PM me and we can work out the details.

PM sent