Custom fog / driving light brackets

I wanted to mount my Denali D4s down on the front fender, but none of the brackets available online were what I had in mind. I had mounted some on my M109R that I fabricated, but I did not want to go through that again, and I had some ideas for improvements.

Since I don't happen to know any local machinists, I contacted Garauld and asked if he would be interested in fabricating some brackets for me. He said yes, and here is what I ended up with:











They are EXACTLY what I wanted, and cost less than 1/2 the price of the lesser brackets on Twisted Throttle and Revzilla!

Great work, Gary! I greatly appreciate it!

Those look nice and Garauld always does good work. I have been happy with everything I have bought from him.

How are the brackets mounted to the forks?

mikerider said:

How are the brackets mounted to the forks?

Click to expand...

There is a bolt that runs through the end of the bracket, replacing one of the fender bolts.

The brackets are nice, but you'll never be able to pull that Haulmark trailer unless you mount a car tire on back.

Geezer said:

The brackets are nice, but you'll never be able to pull that Haulmark trailer unless you mount a car tire on back.

Click to expand...

Yeah, I think a 6' X 12' trailer MIGHT be a little too big!

So is there threads on the inner end ,and a washer and nut goes inside the fender? Price from Galauld? I'm interested