Recent content by flynfjr

Something more to add to this is it is possible to spin the motor when the key is not fully centered in the ignition it will not start and it will create a rich condition/ flooding. This happened to me on my 14 and now on my 16 when it happened on my 16 I knew what was going on right away and...

hey i just crashe my 2006 frjr 1300 it had 165310 on it and now I have a brand new 2014 ES yes I am happy about the new bike but I still cried when I brought it home and had to strip it out I mean 165k I had alot of meorries on tis bike it was hard, but the new bike is awesome.

I need a good left side blue 2006 saddlebag will pay a reasonable amount for a good condition one contact flynfjr thanks

I had the same issue on my 2006 with 150k and found that the solution was in the complete cleaning of tubing and the very small orifices that come off the fuel rail these four vacuum ports all connect to the sensor #12 which feeds info on the air fuel ratio to the ecu. be sure to carefully clean...

Well I have not posted in a while my last post was for 100k and that was about 3 years ago anyway hit 150k and thought I should post it. I will get to 200k eventually. I sure love my 2006 fjr

I like it, black and silver is good have you thought about dark blue and silver also really nice.

:rolleyes: Well I hit 100k on the odometer on last Friday and wanted to to let everbody know. Actually it is 2800 more than that as I had the cluster changed out at 2800, so it is a little more that that. I really have enjoyed this mothorcycle every mile has been good. I figure not bad for an...

Took my Ca 2006 in to the dealer about 30 days ago to get the ground fix installed. Upon completion they told me the that the main wire harnes was fine and did not need to be replaced. I took it home and on the second day home failed to start blinking turn signal lights on dash and blue high...

Well I have been meaning to post to this I have 75426 on my 2006. Bought it new in Sept. of 05. Replaced the instument cluster at 3800 miles and put 71626 on the new instument cluster for a total of 75426. I have enjoyed every moment. I ride everyday! Flynfj

So like many I have been chasing a fairly loud clicking sound in the front end area of the bike for a long time. I re torqued the steering head bearings and have been through the brakes and the brakes do make noies as it has been reported when the pads move around. So where is it comming from...

Does anyone have any experience removing the gas cap hinge rod/ roll pins I need to take it apart to paint it. It appears that the roll pins are drven onto a rod and the rod in the center of the roll pins holds it all together and the outside of the roll pins are the bearing service when it...

Thanks so much big help!

I am looking for info on the R1 shift lever instal on the 06 FJR. I know do a search, I have and I can't find it maybe I am just lame. I remember seeing it a while back does someone have a link to it. It was suppose to give you a more positive shift feel. any help would be most appreciated...

Congrats ona job well done and you really do have brass balls to do that job adn do it well... Go by and see your dealer and let him know that your are not held hostage by him. I t really freaks them out when someone pulls a jhob off like that. Way cool.

1) What year FJR?; 2006, purchased new 9/2006 2) How many miles?; At the time of failure, approximately 26K 3) Failed while running? Or while turning ignition? Or whatever?; Came out of bank tuned key adn dead. called dealer he sent truck to pickme up. 4) Type of failure: Wires pulled...