05 Gen1 Halo kit install

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Datechmaster

Rider
Joined
Mar 6, 2016
Messages
30
Reaction score
4
Location
Boulder CO
Just started disassembling my 05 FJR, for putting some blue 80mm halos in the headlight assembly. I'll update when I've got them in!

15152974_1541981392484367_1945567947_o.jpg


15139450_1541993552483151_1284967077_n.jpg


 
Alright got them in today. All I have left is to install a switch for them to the battery tomorrow. Other than that here's the end result! Please excuse the massive pictures, I didn't want to resize them.

1. Took the housing apart (Put in oven @ 300 for 5 minutes to separate the seal)

2. The Halo installed - Drilled hole, installed rubber, hot glued 4 points of halos to lens, route wires

3. Reassembled bike

4. Light it up

5. Install switch to control when they are on

15078873_1543290885686751_6773086630993735430_n.jpg


15078818_1543290882353418_7361623782004850483_n.jpg


15134543_1543290879020085_2237350967858954547_n.jpg


15128980_1543290935686746_5453123301045250936_o.jpg


15137408_1543290919020081_3737699754911597633_o.jpg


15137624_1543290959020077_1034619977395254515_o.jpg


15137472_1543290999020073_8246315016814459983_o.jpg


 
I assume that they are designed to go that close to a halogen bulb? Hope the heat doesn't kill them. Or soften the glue that holds them in place.

I like the look.

 
Last edited by a moderator:
Nice job. I'd prefer a white color rather than the blue. I assume that the headlights normally run at the same time unless you put them on a switch.

 
I'm aware of the laws here in colorado and I haven't had issues in the past with lights, even with getting pulled over. I put them on a switch so if I need to I can shut them off. The running lights still come on all the time which kind of reduces the blueness of the rings as well.

 
Top