IBR Assistance needed

[Big-B]

I am back at the hotel in Allen. I have a '15 ES,

After I filled up with gas the bike threw a 42 and I could not swap through the dash panels. I started back to the motel and the code went away and I could swap anels again. But the odometer is not working.

We changed tires last night and the check engine, abs, and traction control lights all came on. The TCS eventually went out the ABS and check engine stayed on. I was going to ride with them on.

Any ideas?

Brian Church

484-614-4850

 

[dcarver]

Not sure if the same between a 2006 non-ES and a 2015 ES.. but Error 42 - START? DRIVE?

Given you changed tires... maybe the rear wheel sensor area would be a good place to start? Wish I could do more.. Good luck!

 

[Big-B]

Thanks Dave.

I'll check to see if it looks right and the wire is connected.

 

[Big-B]

Wire looks good. Does anybody have a diagram of a gen3 rear wheel?

I got the wheel off of ebay and did not get to mount it ahead of time. It did have tthe ring that says no magnets. Is there anything else for the abs?

 

[sapest]

HTH's



Best of luck.

-Steve

Ps Admins - will remove this post after IBR if you so advise.

 

[sapest]

I found this reference to code "ABS_42"



-Steve

Sorry, this from a 2016 manual.

 

[dcarver]

Wire looks good. Does anybody have a diagram of a gen3 rear wheel?
I got the wheel off of ebay and did not get to mount it ahead of time. It did have tthe ring that says no magnets. Is there anything else for the abs?

What year wheel? Not the same from gen2 to gen3?