Help Support Yamaha FJR Motorcycle Forum:
AdamK
- Messages
- 683
- Reaction score
- 375
Latest activity Postings About Post areas
-
-
Home to the Future Metropolis of Eastern Oregon's "Why Not 2023" is now a rally reality Thanks JP! -
Booked. First one with this apparent group of misfits, but the ridin in that area and heavy doses of embellishing and BS in the threads...
-
Tank almost ready for install and testing. Best to have the female Quick Disconnect on the tank-side, allows easy removal of stock tank...
-
Vent line exit - aft of the rear tire. I never expect to have an overflow situation, but one never knows... and if it does happen, fuel...
-
Initial inspections of the opening made by removing the fuel pump suggested that there is no possible way to get a hand in there to work...
-
AdamK replied to the thread The WHY NOT 2023 is a reality!.Booked!
-
That's how the external sensors work, depressing the Schrader valve constantly in order to measure the PSI.
-
AdamK replied to the thread Long-Distance Endurance MT10 Project.The stem is always under pressure below the Schrader valve. I can't see pressurizing the additional 1/8 - 3/16" at the top of the stem...
-
Dropped 2 teeth in the rear, gives almost 500 RPMs savings at speed. Side advantage: I have increased my wheelbase by a solid 11mm...
-
AdamK replied to the thread Not a "Reuben Run or The Last Hurrah" - Gauging Interest on a First Annual " Why Not? " in Lapine, OR.Sounds awesome to me!
-
AdamK reacted to PhatAir4Me's post in the thread Not a "Reuben Run or The Last Hurrah" - Gauging Interest on a First Annual " Why Not? " in Lapine, OR with
Like.
Howdy friends and family! Sooooooo I am again looking at this possible event and if we are gonna do it we need to chit or get off it... -
AdamK replied to the thread Long-Distance Endurance MT10 Project.Hopefully I won't notice the performance hit from the added un-sprung weight. :ROFLMAO:
-
I've ran the metal T stems for quite awhile, rims that use to balance easily now take a lot more weight.
-
AdamK replied to the thread Long-Distance Endurance MT10 Project.I just ordered the same. (y)
-
You need to install metal valve stems. I installed metal "T" valve stems so you don't have to remove the cap to adjust pressure.
-
-
Loading…
-
Loading…
-
Loading…