Whooshka

Many years ago I took the Motorcycle Safety Foundation Beginners course because a police officer recommended I do so while we were...

I've been saying for a while that guys bragging on dragging their pegs have a lot of room for improvement of their riding technique.

All of that is what I consider techniques to keep the bike more upright DURING a turn. As you move your mass inside the turn, the bike...

Bike is running! I wasn't able to get the wire clamp screw off of the donor stator cover however. Totally stripped it. Was running out...

I think I have found the proverbial smoking gun. Looks toasted to me...

Yeah, I've seen that and to be honest that is the habit that it took years for me to break. I'm a downhill ski racer - angulation...

My bad. I read your answer (misinterpreted) as it's either a 1 and 1/4 or a 2 and 1/4 was stock. That's what I meant by that's quite a...

OP originally posted the 1 1/4” figure….not me. The Motorcycle Larry bolt was over 2” so the bolt OP is looking for isn’t 3/4” shorter...

That's quite a big difference. Guessing can only screw up the OP. If memory serves me right aren't there different length bolts from...

Thank you for the correction. Appreciate you.

For me - head/body typically same angle or more angle than bike when riding quickly. Depends on the bike - the FJR is a lot harder for...

2014 is a Gen 3. Carry on. ;)

So, here’s what I did. Pork went into the 225° smoker at 8:10 am. At 2:30 pm it started to stall at 155°. Wrapped it and put into my...

Just letting everyone know that Bionicpork (what a great friggin board name BTW) is an outstanding guy to deal with. He wouldn't even...

Maybe you are just expecting too much from the tire; it can't handle the pressure. Does the shop have a tirepest on staff? Let it rest...