Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
2006 FJR1300 YCCS stuck in 5th gear, code SH51, windshield down
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="ionbeam" data-source="post: 1290648" data-attributes="member: 277"><p><img src="https://moscatomom.com/wp-content/uploads/2013/04/staples-easy-button-.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></p><p></p><p>You have an early YCCS bike. Part of the shift actuator bracket on some bikes would fracture and prevent shifting and typically caused a SH-51 error code. This is a problem that Yamaha addressed. Have your dealer's service shop run your VIN (the whole thing <img src="https://www.fjrforum.com/forum//public/style_emoticons/default/wink.png" alt="" class="fr-fic fr-dii fr-draggable " style="" /> ) through their computer and it will show if your FJR has been serviced for this problem.</p><p></p><p>15-Aug-2006, Bulletin M2006-012.</p><p>Affects only AE models, Range: 0006 - 0327, and 0011 - 0079 California</p><p>Part Information: Part Number: 90891-20120-00 -- a kit with 2 brackets, 2 nuts, 4 bolts, 6 drill bits, and a spline to 3/8" drive indicating torque wrench adapter.</p><p></p><p>Test Part: Pull left side cover and air box cover. Pull shift linkage from the actuator. Use the adapter to install an indicating torque wrench Check for movement clockwise and counter-clockwise with 29 ft-lbs of torque (never exceed 29 ft-lbs). If the shaft moves -- replace the actuator assembly.</p><p></p><p>Install brackets (2): Pull shift actuator. Lower the rear shock remote adjuster (3 nuts). Drill out the threads to 8mm on the actuators rear mount hole (ONLY ONE HOLE). Install bracket to the inside of the frame with longer provided bolt. Install bracket 2 to aft mounting hole with the bracket stud installed in the sub-frame crossover plate (existing hole). Re-install actuator shift arm to the shaft and adjust according to service manual.</p></blockquote><p></p>
[QUOTE="ionbeam, post: 1290648, member: 277"] [IMG]https://moscatomom.com/wp-content/uploads/2013/04/staples-easy-button-.jpg[/IMG] You have an early YCCS bike. Part of the shift actuator bracket on some bikes would fracture and prevent shifting and typically caused a SH-51 error code. This is a problem that Yamaha addressed. Have your dealer's service shop run your VIN (the whole thing [IMG]https://www.fjrforum.com/forum//public/style_emoticons/default/wink.png[/IMG] ) through their computer and it will show if your FJR has been serviced for this problem. 15-Aug-2006, Bulletin M2006-012. Affects only AE models, Range: 0006 - 0327, and 0011 - 0079 California Part Information: Part Number: 90891-20120-00 -- a kit with 2 brackets, 2 nuts, 4 bolts, 6 drill bits, and a spline to 3/8" drive indicating torque wrench adapter. Test Part: Pull left side cover and air box cover. Pull shift linkage from the actuator. Use the adapter to install an indicating torque wrench Check for movement clockwise and counter-clockwise with 29 ft-lbs of torque (never exceed 29 ft-lbs). If the shaft moves -- replace the actuator assembly. Install brackets (2): Pull shift actuator. Lower the rear shock remote adjuster (3 nuts). Drill out the threads to 8mm on the actuators rear mount hole (ONLY ONE HOLE). Install bracket to the inside of the frame with longer provided bolt. Install bracket 2 to aft mounting hole with the bracket stud installed in the sub-frame crossover plate (existing hole). Re-install actuator shift arm to the shaft and adjust according to service manual. [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
2006 FJR1300 YCCS stuck in 5th gear, code SH51, windshield down
Top