Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
Heli bar installation
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="zenwhipper" data-source="post: 470169" data-attributes="member: 13632"><p>Its very easy, but takes a couple of hours. You do not need to remove the tank. Just take the tree off, hold it upside down on the tank and drill out the ignition bolts. Just go slow with the drilling and make sure you center the bit (use a steel punch) as best you can on the heads of the bolts. Mine drifted a bit on both sides - but I was still able to 'hog' the bolt heads out if you will. I did have to re-route the throttle cable - but that was real easy too. Just unscrew the assembly at the handle bar and remove the throttle housings from the assembly, re-route and put it all back together.</p><p></p><p>Scott</p></blockquote><p></p>
[QUOTE="zenwhipper, post: 470169, member: 13632"] Its very easy, but takes a couple of hours. You do not need to remove the tank. Just take the tree off, hold it upside down on the tank and drill out the ignition bolts. Just go slow with the drilling and make sure you center the bit (use a steel punch) as best you can on the heads of the bolts. Mine drifted a bit on both sides - but I was still able to 'hog' the bolt heads out if you will. I did have to re-route the throttle cable - but that was real easy too. Just unscrew the assembly at the handle bar and remove the throttle housings from the assembly, re-route and put it all back together. Scott [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
Heli bar installation
Top