Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
FJR Motorcycle Forums
Technical & Mechanical Problems
Ignition (I know) Its posted, this is after the warranty fix
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Yamaha FJR Motorcycle Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Fred W" data-source="post: 1002504" data-attributes="member: 3828"><p>It can't be the clutch switch or the side-stand switch otherwise it would still start in neutral.</p><p></p><p>Can't be the neutral switch because that wouldn't stop the fuel pump from running at key on.</p><p></p><p>It either has to be the kill switch is always open or (much more likely) the <em><strong>second set of contacts in the ignition switch.</strong></em></p><p></p><p>There are two sets of contacts in all FJR ignition switches. The big ones (thicker, red and brown wires) supply switched power to most of the bike. The second contacts (thinner white/blue and blue/black wires in your bike) are in the starting circuit cutoff relay, which is what the neutral switch and kill switch feeds to enable/disable the starter motor and also provides the signal to tell the ECU to turn on the fuel pump.</p><p></p><p>I'd bet that is where your problem is.</p></blockquote><p></p>
[QUOTE="Fred W, post: 1002504, member: 3828"] It can't be the clutch switch or the side-stand switch otherwise it would still start in neutral. Can't be the neutral switch because that wouldn't stop the fuel pump from running at key on. It either has to be the kill switch is always open or (much more likely) the [I][B]second set of contacts in the ignition switch.[/B][/I] There are two sets of contacts in all FJR ignition switches. The big ones (thicker, red and brown wires) supply switched power to most of the bike. The second contacts (thinner white/blue and blue/black wires in your bike) are in the starting circuit cutoff relay, which is what the neutral switch and kill switch feeds to enable/disable the starter motor and also provides the signal to tell the ECU to turn on the fuel pump. I'd bet that is where your problem is. [/QUOTE]
Insert quotes…
Verification
Post reply
FJR Motorcycle Forums
Technical & Mechanical Problems
Ignition (I know) Its posted, this is after the warranty fix
Top