Nikk
Well-known member
Anyone think this is a bad idea?
Tools: C-clamp, 17mm socket, 1" socket, and an extension.
The 17mm fits very nicely through the relay arm and swing arm bearing housings. Align it all up and turn the crank!
This shows the "removal" setup; but just flip the setup around for install.
This works on both ends of the Relay Arm and the Swing Arm Relay bearings.
Tools: C-clamp, 17mm socket, 1" socket, and an extension.
The 17mm fits very nicely through the relay arm and swing arm bearing housings. Align it all up and turn the crank!
This shows the "removal" setup; but just flip the setup around for install.
This works on both ends of the Relay Arm and the Swing Arm Relay bearings.