Recent content by danvforce

PCIII with Wally's smoothness map you'll love it.

Here's the best map if you have slipons, you'll just luv it. https://www.fjr1300.info/misc/PC-III.html You won't the how smooth the throttle response is with Wallys map.

I agree Ipod shuffle in pocket with ear buds, very easy no problems.

I'm in, sure it's not July yet. Darn, I just want some warm weather riding!!!!!

PM sent

I felt the same way, after 40 years of riding many different bikes, I bought a 05 and fell in love. The bike is great stock, but next thing you'll learn is every farkle you add will make the bike better, & the love fixation will get worse. It's addicting, you keep striving for perfection and...

I also did the all balls tapered bearing when my forks were off at GP for a rebuild, the hardest part is removing the old race from the steering stem and pressing on the new seal and bearing. I'm lucky enough to have a friend who works in a diesel repair shop that has a press. If you you press...

Dave from GP sent me a email after they shipped my shock saying they set my ride hight 2 1/2 turns to high when iI received the shock I loosened the lock nut, screwed in the hight adjustment locked the nut and it was good to go. it still sits higher than before and turns in alot quicker. The...

Dave at GP replaced the worn bushing on my 05 that has 15000 mi's, they were slightly worn so he put in a new set. Dave said the gen II forks have 2 bushings in each leg and he commented that all of the genII forks he's done had worn bushing and needed replaced no matter the mi's. he thought it...

I finally was able to test my bike with the GP fork rebuild & Penske 8983 shock last weekend, rode about 70 mi's, temp upper 20's lower 30's. Even thou it was cold I could notice a great difference in the ride and handling of the bike. Thanks again to Dave and all the guys at GP for the great...

Sent my forks in on Dec 14th GP received them on the 19th, I got received the forks and my new Penske 8983 back on Jan 7th. eveythings back on the bike too bad, the wind chill is about 0 to 10 below here in Wyoming, can't try the bike out till it gets a little nicer. Great service from Dave at...

TRY HERE https://www.casporttouring.com/store/mercha...=Yamaha_FJR1300

the same thing happen to my dunlop 220 rear in about 4000 mi's

I want the full fork job, my question is can i get the Penske 8983 with a remote pre-load adjuster? If not how hard is it to adjust the pre-load for 2up trips without the remote adjuster? Thanks Warchild for getting this done, this is what I wanted for christmas.

+1 I'm in, great idea