Search results

Check the pivot points for grease on the shift linkage.

After changing to a Gen 1 slave cylinder I found that the clutch lever pivot bolt had never been greased and was to tight. Made a big difference when that was fixed. ;)

Hi, I have one for a Gen 2. Both front and back in perfect shape, black with silver piping on seams. Has about 4000 miles on it before I went to a Russell. Take $360 shipped in USA. Can send pictures if you want. Harold

Stadium Yamaha, West Airport Freeway Irving has been good to me when I have had to have them service something I can not do. Off Huntington Dr. in Grand Prairie. Where are you located at? Harold :unsure:

Throttlemister sold me a kit with 2 new bushings and a puller so I could use the ones off my FZ1. Price was right too. Harold :rolleyes:

Hi Dave, just sent money by PayPal for a set of the block off plates. Thanks Harold :rolleyes:

Just got back from being there for 4 days this weekend. Thankfully it only rained Thursday and Friday night and the days were dry. Be carefull, we lost 2 riders in the Hill Country in the last 8 days because of excessive speed. Have a great week. Harold

Have you checked the blade to see if you put it on wrong? :blink:

Hi, I would like copies also. Thanks Harold

Looks like lots of time spent on it but how is the peg going to fold once you install the Rubber on the peg? Have a great week Harold

Hi Brodie, include me on the purchase of one of the harness, Just let me know when ,how much and how to get you paid. Thanks Harold Have a great week.

Looks like both cables need to be replaced because they look to be broken where they meet the 90 degree steel adjustment part of the cable. Harold

Hi Chris, After I did a Gen 1 swap I had to bent the clutch lever to be able to use the adjusments on the lever. When I pulled the clutch lever in the end ball would hit the grip before the rest of the lever. I took a boxend wrench and slid it over the ball of the lever and about 1/2 way up...

When I changed out the slave on my 07 I had to adjust the clutch lever all the way out for the clutch to work right. I noticed that the stock clutch lever ball was hitting the grip and taking about 1/2 inch of lever travel away. I bent the lever so that it would be parallel with the grip and...

Finished installing an Audivox 100 on my 07 over the weekend. Ask Hal a couple of questions and hooked it up like he said . It works perfect. was only able to ride for an hr. but it held all different speed on the highway , worked on the hills and stayed where I set it. Hope to try it on a...

Hello Toecutter, I'm in too. Please send email and I will send payment by paypal. Thanks for the trouble you have went to for this deal. Harold Thanks, Paypal sent. Have a great week. Harold

Hi, I had taken the lower fairing off for something else when I did my clutch plates. Just take the clutch cover bolts out and take the cover off. Clutch is exposed and you do not have to remove the rear balence shaft unless you want the clutch basket out too. (not needed) Same as you did...

This sounds like two different problems. My bike had the same problem. Did not want to go into gear when hot or cold without the clutch draging and does not like to shift into 4 or 5 gear after about a 200 mile ride. I fixed the clutch drag by cleaning and soaking the clutch plates. No more...

Grand Sons are coming in from Houston this weekend so I will be busy with them.(dirt bikes) Hope to make the next ride. Hope everone has a nice ride this weekend. Harold

Hi fjrchik, Had mine done at Stadium Yamaha in Irving off 183 and McAuther . Took recall letter to them and they called me when they had it in. (1 week) We set up a date and I picked it up the next afternoon. They said it would only take 1/2 hr. or so if I had time to wait but I could not...