DELETE-PLEASE
Well-known member
- Joined
- Dec 7, 2008
- Messages
- 415
- Reaction score
- 3
Just wondering whether it'd be good enough to hook up a voltmeter by splicing it into an existing wire? Specifically a wire with a 5 amp fuse by the battery that will be used to power a GPS or perhaps charge a cellphone?
Just wondering how this would affect voltmeter readings, or if it'd even effect it enough to worry about it. (I used both "a-ffect" and "e-ffect" figuring 50% right is better than the chance of 100% wrong....hate those two words)
Alexi
PS - I wasn't even going to put in a datel. I was going to go with one of those LED voltmeters (it stays green at a certain voltage, drops to yellow when you're close, and then red if you're low)
Just wondering how this would affect voltmeter readings, or if it'd even effect it enough to worry about it. (I used both "a-ffect" and "e-ffect" figuring 50% right is better than the chance of 100% wrong....hate those two words)
Alexi
PS - I wasn't even going to put in a datel. I was going to go with one of those LED voltmeters (it stays green at a certain voltage, drops to yellow when you're close, and then red if you're low)